Skip to content

Research at St Andrews

Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes

Research output: Contribution to journalArticle

DOI

Standard

Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes. / Da'As, Eman Husni; Irvine, John T.S.; Traversa, Enrico; Boulfrad, Samir.

In: ECS Transactions, Vol. 57, No. 1, 01.01.2013, p. 1851-1857.

Research output: Contribution to journalArticle

Harvard

Da'As, EH, Irvine, JTS, Traversa, E & Boulfrad, S 2013, 'Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes' ECS Transactions, vol. 57, no. 1, pp. 1851-1857. https://doi.org/10.1149/05701.1851ecst

APA

Da'As, E. H., Irvine, J. T. S., Traversa, E., & Boulfrad, S. (2013). Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes. ECS Transactions, 57(1), 1851-1857. https://doi.org/10.1149/05701.1851ecst

Vancouver

Da'As EH, Irvine JTS, Traversa E, Boulfrad S. Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes. ECS Transactions. 2013 Jan 1;57(1):1851-1857. https://doi.org/10.1149/05701.1851ecst

Author

Da'As, Eman Husni ; Irvine, John T.S. ; Traversa, Enrico ; Boulfrad, Samir. / Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes. In: ECS Transactions. 2013 ; Vol. 57, No. 1. pp. 1851-1857.

Bibtex - Download

@article{40dc2b67d83242c6b26b97a044a82dde,
title = "Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes",
abstract = "The impregnation method has been considered as one of the most successful techniques for the fabrication of highly efficient electrodes for solid oxide fuel and electrolysis cells (SOCs) at the lab scale. However, because the impregnation is usually performed manually, its irreproducibility remains a major problem that can be solved by using controllable techniques, such as inkjet printing. In this paper, lanthanum strontium manganite (LSM)/yttria stabilized zirconia (YSZ) air electrodes were prepared by infiltrating YSZ porous bodies with LSM precursor solution using inkjet printing, followed by annealing at 800°C for 2 hours. XRD analysis confirmed the formation of the LSM phase, which was in the form of nanoparticles with size in the 50-70 nm range on the YSZ walls, as revealed by FEG-SEM observations. The effect of printing parameters on the distribution of the impregnated phase was investigated and is discussed.",
author = "Da'As, {Eman Husni} and Irvine, {John T.S.} and Enrico Traversa and Samir Boulfrad",
year = "2013",
month = "1",
day = "1",
doi = "10.1149/05701.1851ecst",
language = "English",
volume = "57",
pages = "1851--1857",
journal = "ECS Transactions",
issn = "1938-5862",
publisher = "Electrochemical Society, Inc.",
number = "1",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Controllable impregnation via inkjet printing for the fabrication of solid oxide cell air electrodes

AU - Da'As, Eman Husni

AU - Irvine, John T.S.

AU - Traversa, Enrico

AU - Boulfrad, Samir

PY - 2013/1/1

Y1 - 2013/1/1

N2 - The impregnation method has been considered as one of the most successful techniques for the fabrication of highly efficient electrodes for solid oxide fuel and electrolysis cells (SOCs) at the lab scale. However, because the impregnation is usually performed manually, its irreproducibility remains a major problem that can be solved by using controllable techniques, such as inkjet printing. In this paper, lanthanum strontium manganite (LSM)/yttria stabilized zirconia (YSZ) air electrodes were prepared by infiltrating YSZ porous bodies with LSM precursor solution using inkjet printing, followed by annealing at 800°C for 2 hours. XRD analysis confirmed the formation of the LSM phase, which was in the form of nanoparticles with size in the 50-70 nm range on the YSZ walls, as revealed by FEG-SEM observations. The effect of printing parameters on the distribution of the impregnated phase was investigated and is discussed.

AB - The impregnation method has been considered as one of the most successful techniques for the fabrication of highly efficient electrodes for solid oxide fuel and electrolysis cells (SOCs) at the lab scale. However, because the impregnation is usually performed manually, its irreproducibility remains a major problem that can be solved by using controllable techniques, such as inkjet printing. In this paper, lanthanum strontium manganite (LSM)/yttria stabilized zirconia (YSZ) air electrodes were prepared by infiltrating YSZ porous bodies with LSM precursor solution using inkjet printing, followed by annealing at 800°C for 2 hours. XRD analysis confirmed the formation of the LSM phase, which was in the form of nanoparticles with size in the 50-70 nm range on the YSZ walls, as revealed by FEG-SEM observations. The effect of printing parameters on the distribution of the impregnated phase was investigated and is discussed.

UR - http://www.scopus.com/inward/record.url?scp=84905053936&partnerID=8YFLogxK

U2 - 10.1149/05701.1851ecst

DO - 10.1149/05701.1851ecst

M3 - Article

VL - 57

SP - 1851

EP - 1857

JO - ECS Transactions

T2 - ECS Transactions

JF - ECS Transactions

SN - 1938-5862

IS - 1

ER -

Related by author

  1. Lattice strain-enhanced exsolution of nanoparticles in thin films

    Han, H., Park, J., Nam, S. Y., Choi, G. M., Parkin, S. S. P., Jang, H. M. & Irvine, J. T. S., 1 Apr 2019, In : Nature Communications. 10, 8 p., 1471.

    Research output: Contribution to journalArticle

  2. Oxygen storage capacity and thermal stability of brownmillerite-type Ca2(Al1-xGax)MnO5+δ oxides

    Huang, X., Ni, C. & Irvine, J. T. S., 14 Aug 2019, In : Journal of Alloys and Compounds. 810, 151865.

    Research output: Contribution to journalArticle

  3. Synthesis and electrochemical characterization of La0.75Sr0.25Mn0.5Cr0.5‐xAlxO3, for IT- and HT- SOFCs

    Abdalla, A. M., Kamel, M., Hossain, S., Irvine, J. T. S. & Azad, A. K., 12 Sep 2019, In : International Journal of Applied Ceramic Technology. Early View

    Research output: Contribution to journalArticle

  4. Photo-catalytic hydrogen production over Au/g-C3N4: effect of gold particle dispersion and morphology

    Caux, M., Menard, H., AlSalik, Y. M., Irvine, J. T. S. & Idriss, H., 7 Aug 2019, In : Physical Chemistry Chemical Physics. 21, 29, p. 15974-15987 14 p.

    Research output: Contribution to journalArticle

  5. In situ thermal battery discharge using CoS2 as a cathode material

    Payne, J. L., Percival, J. D., Giagloglou, K., Crouch, C., Carins, G. M., Smith, R., Gover, R. & Irvine, J. T. S., 2 Aug 2019, In : Journal of The Electrochemical Society. 166, 12, p. A2660-A2664 5 p.

    Research output: Contribution to journalArticle

Related by journal

  1. A solid oxide fuel cell with lanthanum and calcium co-doped strontium titanate as support

    Lu, L. Y., Verbraeken, M. C., Cassidy, M. & Irvine, J. T. S., 1 Jan 2013, In : ECS Transactions. 57, 1, p. 1415-1422 8 p.

    Research output: Contribution to journalArticle

  2. Full ceramic fuel cells based on strontium titanate anodes, An approach towards more robust SOFCs

    Holtappels, P., Irvine, J. T. S., Iwanschitz, B., Theil Kuhn, L., Lu, L. Y., Ma, Q., Malzbender, J., Mai, A., Ramos, T., Rass-Hansen, J., Sudireddy, B. R., Tietz, F., Vasechko, V., Veltzé, S. & Verbraeken, M. C., 1 Jan 2013, In : ECS Transactions. 57, 1, p. 1175-1184 10 p.

    Research output: Contribution to journalArticle

  3. Hybrid direct carbon fuel cells with different types of mineral coal

    Jiang, C., Ma, J., Arenillas, A. & Irvine, J. T. S., 1 Jan 2013, In : ECS Transactions. 57, 1, p. 3013-3021 9 p.

    Research output: Contribution to journalArticle

  4. Improving the performance of SOFC anodes by decorating perovskite with Ni nanoparticles

    Boulfrad, S., Cassidy, M., Traversa, E. & Irvine, J. T. S., 1 Jan 2013, In : ECS Transactions. 57, 1, p. 1211-1216 6 p.

    Research output: Contribution to journalArticle

ID: 255834959