Skip to content

Research at St Andrews

Synthesis and Electrical Characterisation of the Doped Perovskite Titanates as Potential Anode Materials for Solid Oxide Fuel Cells

Research output: Contribution to journalArticle

Author(s)

PR Slater, DP Fagg, John Thomas Sirr Irvine

School/Research organisations

Abstract

This work reports the synthesis and electrical characterisation over a range of oxygen partial pressures (10(-20)-1 atm) of the A-site deficient perovskites Sr1-3x/2LaxTiO3-delta , with a view to establishing their potential as anode materials for solid oxide fuel cells. Single phase samples were observed for synthesis in air for 0 less than or equal to x less than or equal to 0.6, and the materials remained phase pure for both high and low oxygen partial pressures at the measurement temperature of 930 degrees C. Good electrical conductivity, which increased with increasing La content, was observed on reduction in low oxygen partial pressures, with values as high as 7 S cm(-1) [P(O-2)=10(-20) atm], similar to values observed for the related system, Sr1-x/2Ti1-xNbxO3-delta, examined previously. The conductivity of the fully reduced samples showed metallic character from 100 to 930 degrees C. As the oxygen partial pressure was raised, the conductivity dropped, showing an approximate CP(O,)I-lis dependence for porous samples. New samples, Sr1-y/2-3x/2LaxTi1-yNbyO3-delta, With both La and Nb substitutions, were also studied, and these phases showed similar electrical behaviour. Further results for the Sr1-x/2Ti1-xNbxO3-delta system are presented and compared with the La doped systems.

Close

Details

Original languageEnglish
Pages (from-to)2495-2498
Number of pages4
JournalJournal of Materials Chemistry
Volume7
Publication statusPublished - Dec 1997

Discover related content
Find related publications, people, projects and more using interactive charts.

View graph of relations

Related by author

  1. Lattice strain-enhanced exsolution of nanoparticles in thin films

    Han, H., Park, J., Nam, S. Y., Choi, G. M., Parkin, S. S. P., Jang, H. M. & Irvine, J. T. S., 1 Apr 2019, In : Nature Communications. 10, 8 p., 1471.

    Research output: Contribution to journalArticle

  2. Oxygen storage capacity and thermal stability of brownmillerite-type Ca2(Al1-xGax)MnO5+δ oxides

    Huang, X., Ni, C. & Irvine, J. T. S., 14 Aug 2019, In : Journal of Alloys and Compounds. 810, 151865.

    Research output: Contribution to journalArticle

  3. Synthesis and electrochemical characterization of La0.75Sr0.25Mn0.5Cr0.5‐xAlxO3, for IT- and HT- SOFCs

    Abdalla, A. M., Kamel, M., Hossain, S., Irvine, J. T. S. & Azad, A. K., 12 Sep 2019, In : International Journal of Applied Ceramic Technology. Early View

    Research output: Contribution to journalArticle

  4. Enhanced cycling performance of magnesium doped lithium cobalt phosphate

    Kim, E. J., Miller, D., Irvine, J. T. S. & Armstrong, A. R., 11 Sep 2019, (Accepted/In press) In : ChemElectroChem. In press

    Research output: Contribution to journalArticle

  5. Photo-catalytic hydrogen production over Au/g-C3N4: effect of gold particle dispersion and morphology

    Caux, M., Menard, H., AlSalik, Y. M., Irvine, J. T. S. & Idriss, H., 7 Aug 2019, In : Physical Chemistry Chemical Physics. 21, 29, p. 15974-15987 14 p.

    Research output: Contribution to journalArticle

Related by journal

  1. Journal of Materials Chemistry (Journal)

    Finlay Morrison (Reviewer)
    2008 → …

    Activity: Publication peer-review and editorial work typesPeer review of manuscripts

  2. Journal of Materials Chemistry (Journal)

    John Thomas Sirr Irvine (Member of editorial board)
    2007 → …

    Activity: Publication peer-review and editorial work typesEditor of research journal

Related by journal

  1. Magneto-structural correlations of novel kagomé-type metal organic frameworks

    H. Mohideen, M. I., Lei, C., Tuček, J., Malina, O., Brivio, F., Kasneryk, V., Huang, Z., Mazur, M., Zou, X., Nachtigall, P., Čejka, J. & Morris, R. E., 14 Jun 2019, In : Journal of Materials Chemistry. 7, 22, p. 6692-6697 6 p.

    Research output: Contribution to journalArticle

  2. Revealing resonance effects and intramolecular dipole interactions in the positional isomers of benzonitrile-core thermally activated delayed fluorescence materials

    Kukhta, N. A., Higginbotham, H. F., Matulaitis, T., Danos, A., Bismillah, A. N., Haase, N., Etherington, M. K., Yufit, D. S., McGonigal, P. R., Gražulevičius, J. V. & Monkman, A. P., 14 Aug 2019, In : Journal of Materials Chemistry. 7, 30, p. 9184-9194 11 p.

    Research output: Contribution to journalArticle

  3. STA-27, a porous Lewis acidic scandium MOF with an unexpected topology type prepared with 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine

    Prasad, R., Seidner, S., Cordes, D. B., Lozinska, M., Dawson, D., Thompson, M., Düren, T., Chakarova, K., Mihaylov, M., Hadjiivanov, K., Hoffmann, F., Slawin, A. M. Z., Ashbrook, S. E., Clarke, M. & Wright, P., 14 Mar 2019, In : Journal of Materials Chemistry. 7, 10, p. 5685-5701

    Research output: Contribution to journalArticle

  4. Monitoring the assembly-disassembly-organisation-reassembly process of germanosilicate UTL through in situ pair distribution function analysis

    Henkelis, S. E., Morris, S. A., Mazur, M., Wheatley, P. S., McHugh, L. N. & Morris, R., 6 Aug 2018, In : Journal of Materials Chemistry. In Press, 9 p.

    Research output: Contribution to journalArticle

ID: 196343