Skip to content

Research at St Andrews

Synthesis and electrical conductivity of gd-doped bapro3 powders

Research output: Chapter in Book/Report/Conference proceedingConference contribution


A. Magraso, John T S Irvine, X. G. Capdevila, F. Espiell, M. Segarra

School/Research organisations


BaPrl-xGdxO3-d (GBP) was first discovered and proposed as potential proton conducting electrolyte in IT-SOFC in 1998. Its conductivity was reported to be the highest among all protonic conductors reported to date, even higher than doped BaCeO3. In the present work, GBP has been synthesized by using the acrylamide combustion method, which renders a final material with lower particle size, lower temperature sintering and better homogeneity than those obtained by the classical solid state method. Phase purity was achieved after a single thermal treatment of the precursor powder at 1000 °C during 5 hours. The material was characterized by X-ray diffraction, SEM, BET and thermogravimetric and thermodifferential analysis. SEM revealed the nanometric particles (∼ 150 nm) and BET confirmed partial sintering among them (2.85 m2/g; ∼320 nm). Sintering of bulk material is easily achieved using conventional uniaxial pressing. Stability tests under 5% H2/Ar and pure O2 are presented. The crystal structure remains unaltered under O2, but decomposition under H2 atmosphere occurs beyond 420°C. AC impedance spectroscopy has been also performed on dense samples in 5% H2/Ar and pure O2, both dry and wet, well below 420°C, the decomposition temperature in reducing conditions. It was noted that in all these measurements, the total conductivity is dominated by hole conduction. The different behaviour of the conductivity of the material under different conditions is discussed.



Original languageEnglish
Title of host publicationProceedings of the 1st European Fuel Cell Technology and Applications Conference 2005, EFC2005 - Book of Abstracts
Number of pages1
Publication statusPublished - 1 Dec 2005
Event1st European Fuel Cell Technology and Applications Conference 2005, EFC2005 - Rome, Italy
Duration: 14 Dec 200516 Dec 2005


Conference1st European Fuel Cell Technology and Applications Conference 2005, EFC2005

Discover related content
Find related publications, people, projects and more using interactive charts.

View graph of relations

Related by author

  1. Lattice strain-enhanced exsolution of nanoparticles in thin films

    Han, H., Park, J., Nam, S. Y., Choi, G. M., Parkin, S. S. P., Jang, H. M. & Irvine, J. T. S., 1 Apr 2019, In : Nature Communications. 10, 8 p., 1471.

    Research output: Contribution to journalArticle

  2. Oxygen storage capacity and thermal stability of brownmillerite-type Ca2(Al1-xGax)MnO5+δ oxides

    Huang, X., Ni, C. & Irvine, J. T. S., 14 Aug 2019, In : Journal of Alloys and Compounds. 810, 151865.

    Research output: Contribution to journalArticle

  3. B-site doped perovskite ferrate for efficient anode of a solid oxide fuel cell with in situ metal exsolution

    Ni, C., Zeng, Q., He, D., Peng, L., Xie, D-T., Irvine, J., Duan, S. & Ni, J-P., 29 Oct 2019, In : Journal of Materials Chemistry. In press

    Research output: Contribution to journalArticle

  4. Nanostructured perovskite solar cells

    McDonald, C., Ni, C., Maguire, P., Connor, P., Irvine, J. T. S., Mariotti, D. & Svrcek, V., 18 Oct 2019, In : Nanomaterials. 9, 10, 28 p., 1481.

    Research output: Contribution to journalArticle

  5. Enhanced cycling performance of magnesium doped lithium cobalt phosphate

    Kim, E. J., Miller, D., Irvine, J. T. S. & Armstrong, A. R., 26 Sep 2019, In : ChemElectroChem. 6, 18

    Research output: Contribution to journalArticle

ID: 255837216